Portable Wheel Weigh Pads & Axle Weigh Bridges
	HMM-HYTECH Portable Wheel Weigh Pads are ideal for weighing two axle rigid vehicles. They may be used in groups to compensate for the weight transfer characteristic of compensating axles. They are suitable for spot checking of overload conditions by fleet managers and law enforcement agencies.
	Specifications
	Individual Weigh Pad Capacity 2,5,10,20 or 50 Tonnes Axle Load 4 to 80 Tonnes Readout Resolution 0 to 20 Tonnes - 10kg 0 to50 Tonnes - 50kg System Accuracy +/- 0.2% of capacity Field Accuracy +/- 1% of capacity Temperature Range -10° Centigrade to +55° Centigrade Protection IP65 Power Requirement for Charging 220VAC +/- 10%, 50/60 Hz, single phase System Power Runs on rechargeable battery in the Load Indicator
	Mechanical
	MODEL CAPACITY PAD HEIGHT PAD DIMENSIONS SA02 2 Tonnes 65 mm 300 X 350 mm SA05 5 Tonnes 65 mm 400 X 350 mm SA10 10 Tonnes 65 mm 550 X 450 mm SA20 20 Tonnes 65 mm 700 X 550 mm SA50 50 Tonnes 75 mm 750 X 650 mm
	Note: DUMMY WEIGHT PADS to equalize height of all wheels are available. The weigh pads should be used on firm, hard, flat surface. For best results the area just before the weigh pad equal to vehicle length and like wise an equal area after the weigh pad should be flat.
	Single Axle Weigh Bridges HMM-HYTECH single axle weigh bridges are simple, accurate and easy to use. They can be used with minimal amount of civil works and take much less space. APPLICATIONS: Stock Management through accurate measurement and recording of bulk materials movement. Public Utilities, waste Contractors, Concrete and Premix Batching Plants, Aircraft Weighing are other users of such weigh bridges. By proper load distribution you can avoid legal problems as well as improve the life of your vehicle and at the same time reduce maintenance cost. A properly loaded vehicle is safer vehicle on the road. Protect insurance cover. Some Insurance companies will not cover overloaded vehicle. Weighing vehicles on the move at slow speeds is a real time saving feature. Large vehicles such as articulated trucks, multi axle trucks at busy location can easily be weighed. Ferry Service operators or Flyover Companies can use these to prevent seriously overloaded trucks or vehicles from damaging the deck or pavement. FEATURES: All Steel Construction Robust with multiple loadcell design The electronic unit automatically totals the weight of all the axles. The digital load indicators are easy to use. Optional printer can be used to keep records. A large platform is also available for compensating axle vehicles. Weigh in motion upto 10 km/hour.
	Specification
	Platform Capacity 10 Tonnes and 20 Tonnes per axle Load Indicator Totalize upto 99 axle Permitted Overload 150% Field Accuracy +/- 0.6% of actual load Temperature Range -20° C to +55° C Protection IP65 Platform Dimensions 3 meters X 0.75 meter Indicator Mounting Bench / Wall / Stand Power Supply 220 VAC +/- 10% 50/60 Hz
	Optional
	Power Supply  110 VAC or DC Printer Roll Type or 80 Column
	Weigh In Motion Systems
	Weigh in Motion Pad system are suitable for on road weighing by FLYOVER COMPANIES, TOLL HIGH-WAY OPERATORS, STATICAL TRAFFIC DATA COLLECTION, OVERLOAD DETECTION etc. The SAB and SABS series is for permanent installation on roadways while the SABP is for portable applications. The SABS and SABP have small pad size which covers only the wheels on one side. FEATURES: Weigh moving traffic at upto 30 km per hour. Weighing capacity upto 25 Tonnes per axle. Can be used in combination with inductance loops. PC interface, PC Software as per customer requirement.
	Specification
	MODEL SAB MODEL SABS & SABP Length X Width X Height 1.8 M X 0.5 M X 0.28 M 0.9 M X 0.5 M X 0.28 M Weight (Nominal) 120 kg 60 kg Operating Temp     Uncompensated -20° to 80°C -20° to 80°C Compensated -10° to 50°C -10° to 50°C Capacity SAB 125 12.5 Tonnes 12.5 Tonnes SAB 250 25 Tonnes   Overall Accuracy +/- 3% or better +/- 3% or better Excitation 10 VDC 10 VDC Output (Nominal) 0.7 mv/volt 0.7 mv/volt Zero Offset +/- 10 mv +/- 10 mv Least Count (Programmable) 100, 50, 20 or 10 kg 100, 50, 20 or 10 kg Min Dynamic Load 1 Tonne 350 kg Min Static Load 250 kg 200 kg