Product Classification
Torque Equipments
Force Equipments
Pressure Equipments
Tension Measure Equipments
Digital Indicators
Crane Safety Equipments
Testing Machines
Strain Measurements
Strain Gauging Services
Stress Coat / Brittle Coatings
Special Equipments
Product Catalogue

Download Catalogue
Calibration & Testing
Quick Contact
C-24, Shivalik, New Delhi
Pin - 110017, India.
T: 91 11 26673108
F: 91 11 26683970
Stress Coat / Brittle Coatings

Stresscoat is a brittle coating expressly developed to simplify and reduce the time and cost of experimental stress analysis to improve product design.

Engineering structures are designed to transmit loads. The basis of design always assumes the loads must be carried and flow through the structure. Consideration of these two factors assists the designer in deciding upon the shape and selection of materials.

Brittle coat testing with StressKote, a new formulation of Stresscoat brittle coating. It is one of the most straightforward and effective method of experiment stress analysis used to improve product design. It locates critically stressed areas and visually presents principal strain directions, and information on the strain gradients all of which are needed for the proper selection, location and orientation of strain gages for accurate measurement of peak stresses.

StressKote brittle coating (formerly Stresscoat), offers consistently dependable results and is backed by the extensive industry experience of testing and engineering professionals.
Benefits of StressKote Brittle Coating:
  • Applicable for a variety of materials including all metals, many plastics, glass, ceramics, and wood products.
  • Odorless, non-flammable and low in toxicity after the drying cycle.
  • Lower toxicity than similar products formerly available.
  • Easy to apply to almost any part or structure regardless of size, shape or material.
  • Inexpensive, efficient and easy to use, requiring no instrumentation.
  • Presents an insignificant reinforcing effect on the test part.
    In INDIA, StressKote Products can be obtained exclusively through (Authorized Representative of StressKote):
    M/s. Hytech Micro Measurements Pvt. Ltd.
    C-24, Shivalik,
    New Delhi-110017, India
    Phone: 91-11-26673108 / 26680679
    Email :  stresscoat@hytechmicro.com
    Link   :  www.hytechmicro.com/stresscoat.html
    Further details about Stress Coat / Brittle Coatings, Read Here..

    © copyrights reserved Hytech Micro Measurements Pvt. Ltd.