HMM Digital Torque wrench testing and Calibration system Application of proper torque and verification of the same is very important in modern manufacturing processes. Torque is applied by using torque wrenches, pneumatic tools, electric tools or by hand. Improperly torque nuts and bolts can lead to a malfunctioning system, and in some cases, it can result in premature or catastrophic failure. As such it is important that the torque wrenches used are periodically tested and calibrated. Traditionally, torque wrenches have been calibrated using dial type torque applicators or dead weight torque testing systems. While the former are not as accurate the latter are difficult to handle and need trained persons to handle it. On the other hand, HMM's  Digital Torque Calibrators are accurate and relatively easy to handle. The digital readout eliminates any guess work in reading and makes the system user friendly. HMM makes the following types of Torque Wrench Testers cum Calibrators. Manual Torque Wrench Tester : Torque has to be applied by pulling the Torque Wrench handle. Crank Type Torque Wrench System : Force to the Torque Wrench is applied through a geared arrangement. The system consists of three torque ranges. For other ratings, please write to us. DT 1 DT 2 DT 3 DT 4 1 Nm 5 Nm 10 Nm 20 Nm 10 Nm 50 Nm 100 Nm 200 Nm 100 Nm 500 Nm 1000 Nm 2000 Nm Note: In higher capacities, motorized testers are available
	Other Torque Transducers, Testers & Calibrators
	Static Torque Tester Range: 10 Nm to 4000 Nm Applications: Calibration of torque wrenches and hand tools Torque sensing in rheometer Torque sensing of springs Steering torque measurement Hand Held Torque Transducer Range: 0-100 Nm Applications: Checking torque in small electronic assemblies, switches, screws, nuts, etc. Reaction Torque Transducer Range: 5-4000 Nm Applications: To check braking torque Small motor dynamometers Twist measurement Water level in tank, etc Torque Verification System Range: 5-25 Nm Applications: For calibrating all types of tools used for applying torque including electric and pneumatic power tools, torque sensors, both hand and clutch type